Mss

Mss Comblock Driver License

DriverMssComblock

Mss Comblock Driver Portal

  1. In the ComBlock Control Center window detect the ComBlock module(s) by clicking the Detect button, next click to highlight the COM-1704/1705 module to be configured, next click the Settings button to display the Settings window shown below. 3 IMPORTANT NOTE (6/12/14): Due to limited space within the FPGA, several features are not available in.
  2. Higher-performance newer-generation modules are now available: COM-1500/1800/1900 Low-cost generic platform for custom application development; Xilinx Spartan-3 XC3S400-4 FPGA features 400K system gates including 288Kbit of dual port memory and 16 dedicated 18x18 multipliers.
Driver

I gather Microsoft blue tooth installation is missing a vital files that causing it to show SMS/ MMS Device Driver as being incorrectly installed so considering it is Microsoft problem and not my Acer Aspire E1-522 when is Microsoft going to fix this installation issue under Windows 10 Version 1709 Build 16299.437.

Mss Comblock Drivers

Development Platform FPGA + ARM + DDR2 SODIMM socket
+ USB2+ NAND

KEY FEATURES
  • More than an evaluation kit
    • In one small 3'x3' package, this board packs large digital signal processing capabilities:
      • Xilinx Spartan-6 FPGA XC6SLX45 (-A option) or X6SLX150 (-B option)
      • 32-bit ARM coprocessor running at 120 MHz
      • 200-pin SODIMM socket for an optional DDR2 memory module. Transfer speeds in excess of 10 Gbits/s.
      • Two USB 2.0 interfaces to connect a PC to the FPGA and the ARM processor respectively. The PC-FPGA connection supports signaling rates of 480 Mbit/s (High Speed), 85 Mbit/s sustained throughput.
      • NAND: 1 Gbit to store numerous FPGA configurations and user non-volatile data
      • DAC: 12-bit precision, 1 MSamples/s for gain control
  • Seamless interface with RF, DACs, ADCs, Networking modules
    • Real-world applications require more than digital signal processing. The COM-1500 connects to numerous ComBlock modules, like the COM-5102 with gigabit Ethernet and HDMI interfaces, or the COM-30xx RF receivers for frequencies ranging from 0 to 3 GHz, and many more.
    Supports multiple personalities and dynamic reconfiguration
  • 8 custom FPGA configurations can be stored in non-volatile flash memory
  • The selected configuration is automatically reloaded at power up or upon software command within 1 to 5 seconds
  • Graphical User Interface is used for remote monitoring and control over a USB link. This includes loading the FPGA configuration file into non-volatile flash memory
  • ComScope-enabled: key internal signals can be captured in real-time and displayed on the host computer
  • Included development environment:
    • Graphical user interface (ComBlock Control Center) for monitoring, control, and FPGA programming.
    • Hardware schematics
    • USB Windows driver
    • FPGA HDL template code.
    • .ngc drivers for the DDR2 SODIMM, USB 2.0., TCP, Ethernet MAC.
    • VHDL drivers for the DAC, ComScope.
    • ARM coprocessor template code
  • Typical development environment (not supplied):
    • FPGA/VHDL/Verilog development: Free Xilinx ISE Webpack (-A option only) or ISE Logic edition
    • ARM C/C++ development environment: Eclipse, Yagarto tool chain, OpenOCD debugger

    ComBlock COMPATIBILITY LIST
    LeftRight
    Most ComBlocks digital interfacesMost ComBlocks digital interfaces
    COM-3001/2/3/4/5/6/7/8/9/10 RF/IF/Baseband receiversCOM-3504 Dual Analog<->Digital Conversions, 16-bit 250MS/s DACs, 12-bit 150 MS/s ADCs
    COM-5102 Gigabit Ethernet + HDMI Video In/Out interface cardCOM-2802 Synchronized 8-channel digital-to-analog conversion, 900 MS/s
    COM-5401 4-Port 10/100/1000 Mbps Ethernet TransceiversCOM-2001 Dual 2*10-bit digital-to-analog conversion, 125 MS/s