Foxstudio892

Q1 : How to install the i-gotU Travel Logger (how to connect with the PC)?

1. The Android-Debug-Bridge (abbreviated as adb) is a software-interface for the android system, which can be used to connect an android device with a computer using an USB cable or a wireless connection.
2. Mobile Actioon just announce a all new Free Android PC Sync Tool-Android Manager WiFi. Android Manager WiFi is a Free solution,which allows the Android phone to connect with PC wirelessly via.
3. Q1: How to install the i-gotU GPS Computer (how to connect with the PC)? Please go to official website to download the latest software version, the download.
4. I went to the site to download the drivers. But I couldn't install the MA driver because it kept asking me to unplug the USB cable and plug it back. It won't let me install completely even after I did the unplugging/re-plugging dozens of times. The bar was just 1mm away from completion. Any suggestions? I was using the SAM T809/Z510 cable.

A1:
1. Please go to official website to download the latest software version, the download page link below:
http://global.mobileaction.com/download/i-gotU_download1.jsp
2. Please follow the Installation Wizard to instruct you to plug i-gotU device into the USB port on your PC to finish the driver installation.

Driver version: 10.1.; Upload date: 2019.07.16; MD5 checksum: 77df7bcbfcefcaa4ff6988; HW revisions supported: All revisions.

3. After installing the driver of i-gotU device, continue installing the @trip PC software.

4. Please check whether you have installed successfully.
Windows 7:
Please go to 'Control Panel' choose 'System', choose 'Hardware', choose 'Device Manager'.
Windows 8/10:
Right-click or press and hold on the Start button, then select Device Management from the context menu.

there should be 'GPS Logger USB COM Port(COMxx)' under 'Ports (COM&LPT). (please refer to the picture below)

Download Mobile Action Driver Download

Download Mobile Drivers

Download Mobile Action Driver Windows 10

1). Download the driver un-installation and latest program from
http://global.mobileaction.com/@trip/software/atrip.exe (106MB)
2). Please save the file to the desktop. Extract the program (use WinRAR to extract) and click on 「DrvUninst.exe」 under atripDriver to activate the un-installation program.
Then please excute 「DrvInst.exe」 to reinstall the driver.
Please Note:
(1). If you have any firewall software installed, please try disabling those. One of these programs could be blocking the communication between the phone and the PC.
(2). Please be aware that our i-gotU device has to be plugged in directly to the USB port on the computer system instead of going through a hub or a docking station.--> They might decrease the transmissionof electric current for charging.
(3). Please just plug the i-gotU device in the same USB port on the PC, don't change USB port to plug in. Because our products are not Plug-and-Play.
(4). If this still does not resolve the problem, please try unplug and re-plug in the i-gotU device.. Installing the i-gotU device on a different USB port.
(5). 'Don't plug the connector in too hard'! Some users would plug the reverse side of the the connector into the bottom of i-gotU device. It might damage the power ic (integrated circuit).
If you still have the problem, please try on another PC. Or reset your i-gotU device from the @trip PC software. Or you might contact the retailer to check this Device.
If the Device was damaged and still in one-year warranty, please ask the retailer to exchange one for you.

Download Mobile Action Driver Free

5. Open i-gotU Desktop software to connect the i-gotU device with the PC. Then you can download the Waypoint data when the connection is succesful.

Download Mobile Action Drivers